Hot Rolled Coil (HRC)

Hot Rolled Coil, plat baja dengan kualitas terbaik.

Lempengan baja Hot Rolled dan Cold Rolled kami bisa dibentuk menjadi gulungan. Gulungan gulungan dingin memiliki kualitas permukaan yang lebih baik, lebih tipis dan dengan ukuran lebih presisi, juga memiliki sifat mekanik yang baik dan daya tahan dan awitan yang sangat baik, sedangkan gulungan canai panas memiliki kemampuan dan kemampuan las yang sangat baik.

Standar & Spesifikasi: ASTM A-36, ASTM A-572, JIS G 3101, JIS G 3131
Tersedia Ukuran: Tebal 2mm - 25mm, Lebar 900mm - 1524mm, Maksimum 25 MT / Coil

Kapasitas Produksi Hot Roll Coil : 720,000 Mtpy

Specifications

Hot Rolled Coil

Specification	Grade	Product	Thickness		Tensile Test				Bend Test	Impact Test Average Temp. (Joule)		Application		Remarks
		Thickness (mm)	Range (mm)	YS Min. (N/mm2)	UTS (N/mm2)	E min (%) on 50.8 mm			Bend Test	Impact Test Average Temp. (Joule)		Application		Remarks
JIS G 3131	SPHC	2 - 14	2 <2.5	-	270 min	29 (50mm)			Bending 180^o 0.5 x t	-		Commercial Quality Drawing Purpose		For the width of 1524mm (5') the min. thickness is 5mm
			2.5 <3.2			29 (50mm)
			3.2 <4			31 (50mm)
			>4			31 (50mm)
	SPHD	2 - 14	2 <2.5	-	270 min	33 (50mm)						Drawing Quality Cold Rollable
			2.5 <3.2			35 (50mm)
			3.2 <4			37 (50mm)
			>4			39 (50mm)
JIS G 3132	SPHT - 1	2 - 14	1.6 <3	-	270 min	32 (50mm)			Bending 180^o Over 3mm 0.5 x t	-		Welded Steel Pipes & Tubes
			3 <6			35 (50mm)
			6 <13			37 (50mm)
	SPHT - 2	2 - 14	1.6 <3	-	340 min	27 (50mm)			Bending 180^o Over 3mm 1.5 x t	-		Welded Steel Pipes & Tubes
			3 <6			30 (50mm)
			6 <13			32 (50mm)
	SPHT - 3	2 - 14	1.6 <3	-	410 min	22 (50mm)			Bending 180^o Over 3mm 2.0 x t	-		Welded Steel Pipes & Tubes
			3 <6			25 (50mm)
			6 <13			27 (50mm)
JIS G 3106	SS 400	2 - 20	≤ 5	245	400-510	21 (50mm)			Bending 180^o 0.5 x t		-	For General Structure
			>5 - ≤16	245		17 (200mm)
			>16 -≤40	235		21 (200mm)
JIS G 3116	SG 255	2 – 4	1.6 – 6	255	400	28 (50mm)			180^o 1.0 x t	-		For LPG Cylinder
JIS G 3116	SG 295	2 - 3	1.6 – 6	295	400	26 (50mm)			180^o 1.0 x t	-		For LPG Cylinder
JIS G 3113	SAPH 400 (41)	2 - 14	≥2 - <2.5	255	400	32 (50mm)			Bending 180^o 1.0 x t		-		Structure For Automobiles
			≥2.5 - <3.15			34 (50mm)
			≥3.15 - <4			35 (50mm)
			≥4 - <6.3	235		36 (50mm)
			≥6.3 - <14	235		37 (50mm)
	SAPH 440 (45)	2 - 14	≥2 - <2.5	305	402	30 (50mm)			Bending 180^o 1.0 x t	-		Structure For Automobiles
			≥2.5 - <3.15			32 (50mm)
			≥3.15 - <4			33 (50mm)
			≥4 - <6.3	295		34 (200mm)
			≥6.3 - <14	275		35 (200mm)
ASTM A 283	C	2 - 20		205	380 - 515	20 (200mm)						For Storage Tank of Low Temp. Use
ASTM A 285	C	4 - 20	-	205	380 - 515	22 (200mm)						For Storage Tank of Low Temp. Use
ASTM A 36	-	2 - 20	-	250	400 - 550	20 (200mm)						For General Structural Application
A. B. S.	A	4 - 20	-	235	400 - 520	22 (5.65VSo)						For Use In Ship Construction
B. K. I.	A	4 - 20	-	235	400 - 520	22 (5.65VSo)						For Use In Ship Construction
L. R.	A	4 - 20	-	235	400 - 520	22 (5.65VSo)						For Use In Ship Construction
ASTM A 572	42	6 - 19	-	290	415 min	20 (200mm)			-	-		For Welded Construction With Improved Toughness
	50	6 - 19	-	345	450 min	18 (200mm)			-	-
	55	6-19	-	380	485 min	17 (200mm)			-	-
ASTM A 516	70	6 - 19	-	260	485 - 620	17 (200mm)			-	-		For Pressure Vessel Carbon Steel For Moderate & Lower Temp. Service With Improved Notch Toughness
DIN 17100	ST 52.3	6 - 19	≤16	355	490 - 630	20 (200mm)			2XT/180^o	0^oC (27 J)
DIN 17100	ST 52.3	6 - 19	>16 - ≤25	345	490-630	20 (200mm)			2XT/180^o	0^oC (27 J)
BS 4360	50 A	6 - 19	≤16	355	490 - 640	18 (200mm)			-	-		Superior Weldability
	50 A	6 - 19	>16 - ≤40	345	490 - 640	18 (200mm)			-	-
	50 B	6 - 19	≤16	355	490 – 640	18 (200mm)				20^oC (27 J)
	50 B	6 - 19	>16 - ≤40	345	490 – 640	18 (200mm)				20^oC (27 J)
	50 C		≤16	355	490 – 640	18 (200mm)				0^oC (27 J)
	50 C		>16 - ≤40	345	490 – 640	18 (200mm)				0^oC (27 J)
	50 D		≤16	355	490 – 640	18 (200mm)				-20^oC (27 J)
	50 D		>16 - ≤40		490 – 640	18 (200mm)				-20^oC (27 J)
EN 10025	S 355 JR	6 - 19	≤16	355	470 - 630	20(5.65VSo)			-	20^oC (27)
	S 355 JR	6 - 19	>16 - ≤40	345	470-630	19(5.65VSo)			-	20^oC (27)
	S 355 JO	6 - 19	≤16	355	470-630	20(5.65VSo)			-	0^oC (27)
	S 355 JO	6 - 19	>16 - ≤40	345	470-630	19(5.65VSo)			-	0^oC (27)
	S 355 J2	6 - 19	≤16	355	470 - 630	20(5.65VSo)			-	-20^oC (27)
	S 355 J2	6 - 19	>16 - ≤40	345	470-630	19(5.65VSo)			-	-20^oC (27)
JIS G 3106	SM 490 A	6 - 19	≤16	325	490 - 610	17 (200mm)			-	-
	SM 490 A	6 - 19	>16 - ≤40	315	490-610	21 (200 mm)			-	-
	SM 490 B	6 - 19	≤16	325	490 - 610	17 (200mm)			-	0^oC(27)
	SM 490 B	6 - 19	>16 - ≤40	315	490-610	21 (200 mm)			-	0^oC(27)
	SM 490 C	6 - 19	≤16	325	490 - 610	17 (200mm)			-	0^oC ( 47 J)
	SM 490 C	6 - 19	>16 - ≤40	315	490-610	21 (200 mm)			-	0^oC ( 47 J)
	SM 490 YA	6-19	≤16	365	490 - 610	15 (200mm)			-	-
	SM 490 YA	6-19	>16 - ≤40	355	490 - 610	19 (200mm)			-	-
	SM 490 YB	6-19	≤16	365	490 - 610	15 (200mm)			-	-0^oC (27 J)
	SM 490 YB	6-19	>16 - ≤40	355	490 - 610	19 (200mm)			-	-0^oC (27 J)
AS 1594	HA 300 / HU 300	2 – 20	≤3	300	400 min	15 (200mm)		-			-
			>3 - ≤5	300	400 min	16 (200mm)
			>5	300	400 min	16 (200mm)
	HA 250 / HU 250	2 - 20	≤3	250	400 min	16 (200mm)	-				-
			>3 - ≤5	250	400 min	17 (200mm)
			>5	250	400 min	17 (200mm)
BS 4360	40 A	4 - 20	≤16	235	340 - 500	22 (200mm)			-			For General Structure Purpose		For the width of 1524mm (5') the min. thickness is 5mm
	40 A	4 - 20	>16 - ≤40	225	340 - 500	22 (200mm)			-
	40 B	4 - 20	≤16	235	340 - 500	22 (200mm)			-	20^oC (27 J)
	40 B	4 - 20	>16 - ≤40	225	340-500	22 (200mm)			-	20^oC (27 J)
	40 C	4 - 20	≤16	235	340-500	22 (200mm)			-	0^oC (27 J)
	40 C	4 - 20	>16 - ≤40	225	340-500	22 (200mm)			-	0^oC (27 J)
	40 D	4 - 20	≤16	235	340 - 500	22 (200mm)			-	-20^oC (27 J)
	40 D	4 - 20	>16 - ≤40	225	340-500	22 (200mm)			-	-20^oC (27 J)
	43 A	5 - 20	≤16	275	430 - 580	20 (200mm)			-	-20^oC (27 J)
	43 A	5 - 20	>16 - ≤40	265	430 - 580	20 (200mm)			-	-20^oC (27 J)
	43 B	5 - 20	≤16	275	430 - 580	20 (200mm)			-
	43 B	5 - 20	>16 - ≤40	265	430 - 580	20 (200mm)
	43 C	5 - 20	≤16	275	430 - 580	20 (200mm)			-	0^oC (27 J)
	43 C	5 - 20	>16 - ≤40	265	430 - 580	20 (200mm)			-	0^oC (27 J)
	43 D	5 - 20	≤16	275	430 - 580	20 (200mm)			-	-20^oC (27 J)
	43 D	5 - 20	>16 - ≤40	265	430 - 580	20 (200mm)			-	-20^oC (27 J)
DIN 17100	ST 37.2	2 - 20	<16	235	340 - 470	24 (200mm)			1XT/180^o	20^oC (27 J)		For General Structure Purpose
			>16 <40	225		24 (200mm)
			>40	225		24 (200mm)
EN 10025	S 235 JR	2 - 20	≤16	235	360 - 470	26 (5.65VSo)				20^oC (27 J) (as per order)		For General Structure Purpose
			>16 ≤40	225		26 (5.65VSo)
			>40 ≤63	215		25 (5.65VSo)
			>63 ≤80	215		24 (5.65VSo)
	S 235 JR	2 - 20	≤16	235	340 - 470	24 (5.65VSo)			-	20^o C (27 J) (as per order)
			>16 ≤40	225		23(5.65VSo)
			>40 ≤63	225		23(5.65VSo)
			>63 ≤80	-		22 (5.65VSo)
	S 235 JO	2 - 20	≤16	235	340 - 470	24 (5.65VSo)			-	0^oC (27 J)
			>16 ≤40	225		24(5.65VSo)
			>40 ≤63	215		23 (5.65VSo)
			>63 ≤80	215		22 (5.65VSo)
	S 235 J2	2 - 20	≤16	235	340 - 470	26 (5.65VSo)			-	-20^oC (27 J)
			>16 ≤40	225		26 (5.65VSo)
			>40 ≤63	215		25 (5.65VSo)
			>63 ≤80	215		24 (5.65VSo)
	S 275 JR	4 - 20	≤16	275	410 - 560	26 (5.65VSo)			-	20^o C (27 J)
			>16 ≤40	265		26 (5.65VSo)
			>40 ≤63	255		25 (5.65VSo)
			>63 ≤80	245		24 (5.65VSo)
	S 275 JO	4 - 20	≤16	275	410 - 560	21(5.65VSo)			-	0^oC (27 J)
			>16 ≤40	265		20(5.65VSo)
			>40 ≤63	255		20 (5.65VSo)
			>63 ≤80	245		19 (5.65VSo)
	S 275 J2	4 - 20	<16	275	410 - 560	26 (5.65VSo)			-	-20^oC (27 J)
			>16 <40	265		26 (5.65VSo)
			>40 <63	255		25 (5.65VSo)
			>63 <80	245		24 (5.65VSo)

Back to Flat Products